Installing custom roms in your motoe mobiles

For installing custom roms in your mobile your phone must be rooted.If so follow my guide or else refer my previous post to safely root your motoe mobile.Here are the steps to do so.One should be more cautions before doing this task and more people face difficulties like soft brick (which can be overcome) and hardbrick(this is permanent damage ,hard bricked device cannot be recovered).Proceed at your own risk .If you follow my advice i will try my level best to accomplishing task without any trouble shoots.

Before proceeding further one should be cautious about 3 things which leads to hard brick your device.They are

1. Verifying 2 to 3 times before flashing any custon rom or stock rom whether that one is suitable for your firmware.If not hard brick occurs and you have to look for new phone this phone is no longer used.
2. This is very important one 70-80% of hard bricking problems occurs due to this issue.After unlocking nbootloader plz don't do ant ota updates to your mobile.
3. This is giving least priority because all of you before doing this your mobile should be charged more than half.If  your phones power off during flashing your mobile may brick.

Steps For Installing custom roms in your motoe mobile:

• The process of installing any custom rom is simple just downloading the custom rom suitable for your device and flashing it
• You can have a look of this if your looking for your suitable best custom rom
• I will explain the procedure of flashing custom rom miui8 and the process of installing other stock and custom roms is same
• Enable usb debugging in mobile phone and switch off mobile and go to boot menu and then to recovery option
• I think you have installed twrp recovery as custom recovery if you have followed my previous tutorials
• Before flashing your custom rom very important step to note is you have to keep back up of your stock rom because if any thing goes wrong you can easily flash your stock rom
• And then wipe data as per instructions given in below video
• Then browse for you file location in internal memory where you have stored your custom rom you wanted to flash in my case it is miui8 rom
• Confirm flash and reboot your device 

now you have succesfully installed custom rom in your mobile and it will take time to display your sim signals dont worry.In miui8 rom your no need to installl gaps.In other custom roms you need to flash gaps by following same procedure.

video of installing miui8 custom rom which may solve some of your problems

dealing with roms

Installing custom roms in your motoe mobiles

hellboymaddi Wednesday, 21 June 2017

Downgrade motoe from lollipop to kitkat

Getting lollipop on your device was always of utmost excitement. But, i do noticed that many people faced problems after upgrading their device to lollipop. They had battery issues, restart problems and many more. These problems didn’t exist in the kitkat rom. The kitkat rom was the most stable rom for this device. So, in this short little tutorial, i’ll show you guys how to downgrade your moto e from lollipop to kitkat by following some really simple steps.

stepwise procedure :

1. Install minimal adb and fastboot in a specific new folder.
2. Now, extract the kitkat stock rom in the same folder.
3. Now, copy the batch script file into that folder.
4. Boot your moto e to fastboot mode. To do so, first, switch off your phone. Now, press the power button and and volume down button at the same time and release after 5-10 seconds.
5. Now, connect your moto e to your PC and run the batch script file.

Congratulations, you’ve successfully flashed kitkat on your moto e! Enjoy!

you can find clear procedure from following video

all the download links are in description and this procedure works all other motoe mobiles by downloading their own stock roms.

dealing with roms

Downgrade motoe from lollipop to kitkat

hellboymaddi