root and install custom roms in motoe mobiles

   motoe mobile stepwise procedure for rooting and installing custom roms:

                                                     

Are you looking for a site where you can find the way to root your motoe device and do all kinds of stuff like installing stock and custom roms and removing pre installed apps.Then stop searching you are in right spot as i have given a tutorial which i have checked and its l00% working for motoe mobiles.

you need to follow the steps carefully inorder to getting things done in an easy manner.The process of rooting involves steps :

1)BootLoader Unlocking
2)Installing TWRP(custom) Recovery
3)Flashing latest SUPERSU zip package

 

 

After you rooted your device you can play with your phone by installing various custom and stock roms.

"warning:Rooting your device will void its warrenty .proceed at your own risk"

Prerequistes:

1)The entire process involves data loss so keep backup of your data before proceeding this
2)Your mobile should be charged more than half else trouble shooting may occur which leads to soft brick of your mobile
3)As you need to connect your pc with your mobile using usb cable you need to install motoe drivers
4)Enable usb debugging on your mobile and if your developer you can find usb debugging option in settings->DeveloperOptions else you needto be developer for this you have to click on buildin number(5 to 7 times until you find the message you are now developer)
5)You should also install Minimal ADB  and Fastboot in your pc

your now ready to unlock your bootloader

                                                                    

others

root and install custom roms in motoe mobiles

hellboymaddi Sunday, 25 June 2017

Unlocking Bootloader

unlocking bootloader in motoe devices:

The procedure for unlocking bootloader for all motoe devices is same and is as follows:

=

• first of all switch off your mobile and boot into fastboot mode or bootloader mode by pressing volume down and power buttons simultaneously for 11 secondsT
• As you have connected your mobile with your pc go to location where you can installed minimal ADB and Fastboot
• Then press shift+right click you will find open command window here from which command prompt will be opened
• Now type the command

                    fastboot devices

        if it displays somebulk message followed by fastboot then your device is connected to pc                    succesfully proceed further else some error may occcured try by using other usb cable

• Then type another command 

                   fastboot oem get_unlock_data

      you will get a large code consisting of numbers and alphabets copy that code in a single line and         save it in text editor

• Now go to motorola site.Sign in using your google account or motorola id.Scroll down the page below and   paste string in the field at step #step6.Then click on "can my device be unlocked?",after request unlock key and select i agree option
• Then you will get mail of the unlock key which may look like this

                     unlock code:SUDNTGU4WNZFXAQTSAFT

• In command prompt heading adb directory type command and press enter

                    fastboot oem unlock SUDNTGU4WNZFXAQTSAFT(my unlock code)

• Your device bootloader is now unlocked and you can see logo

•  you can again lock it by command

                  fastboot oem lock

you can get clear idea now to unlock bootloader its applicable for all moto e devices

rooting

Unlocking Bootloader

hellboymaddi Saturday, 24 June 2017

Installing TWRP(custom) recovery

TWRP recovery is one of the most used custom recovery app for android platform .Infact TWRP recovery represents the touch based software of the classic recovery

steps of installation:

• You have to install the minimal ADB and fastboot in your pc
• Then download the twrp recovery img and paste it in the folder of minimal adb and fastboot and rename the image name recovery.img(if required)
• Then power off your mobile and go to fastboot mode and then connect it to pc
• Go to that minimal  ADB folder and press shift+right click you willl find open command window here option from which command prompt will be iopened
• Type the command

                         fastboot flash recovery recovery.img 

• From fastboot mode press volume down button and highlight recovery and press power button to  select
• Inorder to go back to recovery select reboot system

congrats ,you have successfully installed TWRP recovery on your Motorola Motoe

Still you are having any doubts refer this video

rooting

Installing TWRP(custom) recovery

hellboymaddi Friday, 23 June 2017

Rooting Motoe by Flashing SuperSU zip Package

The process of flashing supersu package is very simple and it should be done if and only if you have unlocked bootloader and installed any custom recovery.They will find in this blog only refer them and after doing so proceed as follows.

steps for flashing supersu:

• Download latest supersu application for your mobile if your android version is kitkat then click here for supersu if it is lollipop then here
•  Just install it in your phone internal memory and enable  usb debugging and switch off phone get into boot menu and connect to pc 
• Go to recovery option and you will find this if twrp is sucessfully installed in your mobile
• click on install and search for your supersu which was downloaded and kept in internal memory
• confirm flash and thats it your mobile is now rooted
• reboot system to go into normal mode and check whether your device is rooted are not by installing various rootchecker apps available in playstore

you can find both twrp and supersu flashing in one video.see this the post

rooting

Rooting Motoe by Flashing SuperSU zip Package

hellboymaddi Thursday, 22 June 2017

Installing custom roms in your motoe mobiles

For installing custom roms in your mobile your phone must be rooted.If so follow my guide or else refer my previous post to safely root your motoe mobile.Here are the steps to do so.One should be more cautions before doing this task and more people face difficulties like soft brick (which can be overcome) and hardbrick(this is permanent damage ,hard bricked device cannot be recovered).Proceed at your own risk .If you follow my advice i will try my level best to accomplishing task without any trouble shoots.

Before proceeding further one should be cautious about 3 things which leads to hard brick your device.They are

1. Verifying 2 to 3 times before flashing any custon rom or stock rom whether that one is suitable for your firmware.If not hard brick occurs and you have to look for new phone this phone is no longer used.
2. This is very important one 70-80% of hard bricking problems occurs due to this issue.After unlocking nbootloader plz don't do ant ota updates to your mobile.
3. This is giving least priority because all of you before doing this your mobile should be charged more than half.If  your phones power off during flashing your mobile may brick.

Steps For Installing custom roms in your motoe mobile:

• The process of installing any custom rom is simple just downloading the custom rom suitable for your device and flashing it
• You can have a look of this if your looking for your suitable best custom rom
• I will explain the procedure of flashing custom rom miui8 and the process of installing other stock and custom roms is same
• Enable usb debugging in mobile phone and switch off mobile and go to boot menu and then to recovery option
• I think you have installed twrp recovery as custom recovery if you have followed my previous tutorials
• Before flashing your custom rom very important step to note is you have to keep back up of your stock rom because if any thing goes wrong you can easily flash your stock rom
• And then wipe data as per instructions given in below video
• Then browse for you file location in internal memory where you have stored your custom rom you wanted to flash in my case it is miui8 rom
• Confirm flash and reboot your device 

now you have succesfully installed custom rom in your mobile and it will take time to display your sim signals dont worry.In miui8 rom your no need to installl gaps.In other custom roms you need to flash gaps by following same procedure.

video of installing miui8 custom rom which may solve some of your problems

dealing with roms

Installing custom roms in your motoe mobiles

hellboymaddi Wednesday, 21 June 2017

Removing bootloader unlocked logo

If you have unlocked bootloader in your motoe it is always showing bootloader unlocked logo.It's not looking fair so we .can replace that logo with any other logo we preferred i suggest this if you have others then try that.

Stepwise Sequence To Remove Bootloader Unlocked Logo:

• It is quite easy process if you have twrp installed in your mobile
• Download preffered logo and place it in your internal memory of mobile
• Go to fast boot mode and then to recovery option 
• Just find the path where you have kept logo file
• Simply flash it to take changes and reboot system 

video which helps you understand better is here

others

Removing bootloader unlocked logo

hellboymaddi

Downgrade motoe from lollipop to kitkat

Getting lollipop on your device was always of utmost excitement. But, i do noticed that many people faced problems after upgrading their device to lollipop. They had battery issues, restart problems and many more. These problems didn’t exist in the kitkat rom. The kitkat rom was the most stable rom for this device. So, in this short little tutorial, i’ll show you guys how to downgrade your moto e from lollipop to kitkat by following some really simple steps.

stepwise procedure :

1. Install minimal adb and fastboot in a specific new folder.
2. Now, extract the kitkat stock rom in the same folder.
3. Now, copy the batch script file into that folder.
4. Boot your moto e to fastboot mode. To do so, first, switch off your phone. Now, press the power button and and volume down button at the same time and release after 5-10 seconds.
5. Now, connect your moto e to your PC and run the batch script file.

Congratulations, you’ve successfully flashed kitkat on your moto e! Enjoy!

you can find clear procedure from following video

all the download links are in description and this procedure works all other motoe mobiles by downloading their own stock roms.

dealing with roms

Downgrade motoe from lollipop to kitkat

hellboymaddi

Difference between soft brick and hard brick

soft brick vs hard brick 

A soft brick, is usually just when you're phone is stuck in a bootloop, and as the name implies, is caused by a software error, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by reflashing your ROM in recovery.

Now then, as mentioned earlier a hard brick is where you're device won't boot at all. You have to either repair it yourself, using a JTAG or send it into a JTAG service to have it fixed. These are usually caused by people flashing ROMs or kernels not meant for their device. Flashing a ROM not meant for your device, can throw your system through a loop, because it also flashes the kernel.

The kernel is what allows your phones software to interact with the hardware. It contains all the necessary info for boot, and also your phones drivers. There's a line in the kernel called "bootclasspath", and if this isn't what it should be for your device, you will get a hard brick, as this line tells your phone how to boot.

if you are not yet convinced then watch this video

solution for softbrick in motoe mobiles:

As the softbrick is not a tough problem you can get rid of this problem by flashing again suitable custom or stock rom.Risk involves when it comes to hard brick.

solution for hardbrick in motoe mobiles:

Hard bricking a mobile is worse and it is sad to say that there is no solution to recover hard bricked mobile for motoe phones.But in case of motog mobiles we can solve this issue by using blankflash files depending on your android version your using before unbricking your mobile.Hoping that we may find solution for motoe hard bricked mobiles in future.As soon as i found the solution i will update it.At present the only way to unbrick hard bricked mobile is to change motherboard which may cost more than half rate of mobile for outwarrenties .The goodnews for warrenty holders are they can get it fixed in services centres free if and only if they say to the service centre members  that

they did not unlocked bootloader.

trouble shooting

Difference between soft brick and hard brick

hellboymaddi Tuesday, 20 June 2017